Genotek Strip Joint is a movement/control joint manufactured with Stainless Steel, Brass or Aluminum bonded to a neoprene rubber insert.
The side plates range from 15mm to 100mm in height and vary on thickness as per project demand. Can be used in interiors as well as exterior applications.
|ready to use|
|Suitable for Interiors and Exteriors|
|can be applied in both exterior and interior to match aesthetically|
|Suitable for floor to floor applications|
|Ideal for floor to floor conditions for smooth transition|
|Meets American Standard ANSI A 108.1 and British Standard BS5385|
|"Meet ANSI A 108.1 for Installation of Ceramic Tiles and BS 5383: Part 3: 1989 code of practice for the design and installation of ceramic floor tile and mosaics.
|The integrated floor finish cracked.|
|Solution: Prevent excessive load from the design load capacity.|
|The pan nosing and the base frame are becoming a tripping hazard.|
|Solution: Adjust the blockout or the upstand height to level the top of the base frame and pan nosing flushed to the floor finish.|
|Produce excessive noise.
|Tightened the centering turn-bar screw properly. Be careful not to over-tightened because it will bend the center pan.|
|Is this profile customizable to accommodate the gap bigger than 300mm?|
|What is the standard aluminum finish of this profile?|
|Answer: Mill Finish|