The Z – 5200 Expansion Joint Cover is an ideal Cover for Floor, Wall, and Ceiling for seamless integration. The Series is suitable for Interior and Exterior Areas where Minimal Visible Sightline of the Profile is expected.
The Z – 5200 is an Aluminium + Rubber Expansion Joint Cover Profile. The Profile is a combination of a Heavy-Duty Pan Type System and an Elastomeric Gasketed Floor and Wall Joint Cover. The Profile is capable of accommodating Thermal Movement without applying stress to any of its Metal Components and it can undertake Multidirectional Movement including the Lateral Shear Movement.
Small Sightline |
only shows minimal visible width even the large Gap |
Integrated Floor Finishes |
specially design for floor finishes integration like marbles and stones. |
With Centering Turn-Bar |
holds the cover in place in case of seismic activities |
Smooth Transition |
design for recessed installation for smooth transition |
Can Accommodate Large Gap |
this profile can be easily modified to accommodate large gap |
Accommodate Multi-directional Movement |
accommodates seismic activities |
Drawings SKU’s | Height | Gap | |
Z520010050300 Z-5200-100 Floor-To-Floor |
50mm | 100mm | Download |
Z520015050406 Z-5200-150 Floor-To-Floor |
50mm | 150mm | Download |
Z520020050456 Z-5200-200 Floor-To-Floor |
50mm | 200mm | Download |
Z520025050506 Z-5200-250 Floor-To-Floor |
50mm | 250mm | Download |
ZK520020050328 ZK-5200-200 Floor-To-Wall |
50mm | 200mm | Download |
ZK520025050378 ZK-5200-250 Floor-To-Wall |
50mm | 250mm | Download |
The integrated floor finish cracked. |
Solution: Prevent excessive load from the design load capacity. |
The pan nosing and the base frame are becoming a tripping hazard. |
Solution: Adjust the blockout or the upstand height to level the top of the base frame and pan nosing flushed to the floor finish. |
Produce excessive noise. |
Solution: Tightened the centering turn-bar screw properly. Be careful not to over-tightened because it will bend the center pan. |
Is this profile customizable to accommodate the gap bigger than 300mm? |
Answer: Yes |
What is the standard aluminum finish of this profile? |
Answer: Mill Finish |
If you have Specifications, Drawings, or a Bill of Quantities, we will review them and get back to you with a proposal.
Feel free to schedule a meeting with one of our consultants to help you find the right product.
Download our Catalogue so that you may pass it on to your colleagues
© 2020 Genotek™ Expansion Joint Covers. All rights reserved