5000 Series
Z-5000
Floor and Wall expansion Joint System
Gap 50mm Z-5000-50
GENOTEK Z – 5000 Floor and Wall Expansion Joint System is a heavy-duty pan type system that accommodates multi-directional movement while offering minimum profile visibility.
The system has a high load-bearing capacity and provides a simple, an attractive and durable solution for external and internal areas both.
Specifications
System Drawing
Specifications
Application Area:
Floor or Wall
INSTALLATION TYPE:
Recessed
LOAD CAPACITY:
High Pedestrian Traffic
MOVEMENT CAPACITY:
50%-100%
Suitable for:
Commercial, Residential, Retail, Hotel, Hospital, Mall
Material:
Aluminium and Rubber
Gap Size:
50mm - 300mm
KEY ELEMENTS
Seismic Cover System
 Small Sightline |
| only shows minimal visible width even the large Gap |
 Integrated Floor Finishes |
| specially design for floor finishes integration like marbles and stones. |
 With Centering Turn-Bar |
| holds the cover in place in case of seismic activities |
 Smooth Transition |
| design for recessed installation for smooth transition |
 Can Accommodate Large Gap |
| this profile can be easily modified to accommodate large gap |
 Accommodate Multi-directional Movement |
| accommodates seismic activities |
|
Drawings SKU’s
|
Height | Gap | |
| ZK50005050200 ZK-5000-50 Floor-To-Wall |
50mm | 50mm | Download |
| ZK500010050209 ZK-5000-100 Floor-To-Wall |
50mm | 100mm | Download |
| Z500015050368 Z-5000-150 Floor-To-Floor |
50mm | 150mm | Download |
| ZK500015050260 ZK-5000-150 Floor-To-Wall |
50mm | 150mm | Download |
| Z500020050456 Z-5000-200 Floor-To-Floor |
50mm | 200mm | Download |
| ZK500020050328 ZK-5000-200 Floor-To-Wall |
50mm | 200mm | Download |
| Z500025064600 Z-5000-250 Floor-To-Floor |
64mm | 250mm | Download |
| ZK500025064473 ZK-5000-250 Floor-To-Wall |
64mm | 250mm | Download |
| Z500030064725 Z-5000-300 Floor-To-Floor |
64mm | 300mm | Download |
| ZK500030064515 ZK-5000-300 Floor-To-Wall |
64mm | 300mm | Download |
| The integrated floor finish cracked. |
| Solution: Prevent excessive load from the design load capacity. |
| The pan nosing and the base frame are becoming a tripping hazard. |
| Solution: Adjust the blockout or the upstand height to level the top of the base frame and pan nosing flushed to the floor finish. |
| Produce excessive noise. Solution: |
| Tightened the centering turn-bar screw properly. Be careful not to over-tightened because it will bend the center pan. |
| Is this profile customizable to accommodate the gap bigger than 300mm? |
| Answer: Yes |
| What is the standard aluminum finish of this profile? |
| Answer: Mill Finish |
Cant find what you are looking for?
Send us your Inquiry
If you have Specifications, Drawings, or a Bill of Quantities, we will review them and get back to you with a proposal.
Schedule a Meeting
Feel free to schedule a meeting with one of our consultants to help you find the right product.
Download Our Catalogue
Download our Catalogue so that you may pass it on to your colleagues