4000 Series
Z-4000
Seismic Floor Expansion Joint Cover
Gap 50mm Z-4000-50
The Z – 4000 Expansion Joint Floor System is a full aluminium cover designed to accommodate thermal as well as seismic movements.
The self-centering plate is available in Aluminium as well as Stainless Steel and allows for the desired movements to protect the structure during a seismic event.
Specifications
System Drawing
Specifications
Application Area:
Floor
INSTALLATION TYPE:
Recessed
LOAD CAPACITY:
High Pedestrian Traffic
MOVEMENT CAPACITY:
50%-100%
Suitable for:
Commercial, Residential, Retail, Hotel, Hospital, Mall
Material:
Full Aluminium (with Stainless Steel Option)
Gap Size:
50mm - 200mm
KEY ELEMENTS
Seismic Cover System
| Cover Plate Seismic System |
| Looks like a cover plate only but can accommodate seismic movement |
| Integrated Floor Finishes |
| Can be used on marble and tile finish if the is no heavy load applied. |
| With Centering Turn-Bar |
| holds the cover in place in case of seismic activities |
| Smooth Transition |
| design for recessed installation for smooth transition |
| Can Accommodate Large Gap |
| this profile can be easily modified to accommodate large gap |
| Accommodate Multi-directional Movement |
| accommodates seismic activities |
| Drawings SKU’s | Height | Gap | |
| Z40005040150SS Z-4000-50SS Floor-To-Floor |
40mm | 50mm | Download |
| Z40005040150 Z-4000-50 Floor-To-Floor |
40mm | 50mm | Download |
| Z400010040200 Z-4000-100 Floor-To-Floor |
40mm | 100mm | Download |
| ZK400010040150 ZK-4000-100 Floor-To-Wall |
40mm | 100mm | Download |
| Damage on the floor finish below the cover plate. |
| This is because of the heavy load that applied to the top of the cover plate. Don't use marble or tile finished below the cover plate if the area where the floor expansion joint covers applied is subjected to heavy traffic. Provide a 50mm allowance from the edge of the cover plate to the start of your marble or tile application. You can use epoxy grout for the finish floor level below the cover plate. |
| Bended cover plate. |
| This is due to the excessive load applied to the plate. Replace the expansion joint cover plate cover with the right thickness that will accommodate the site load requirements. |
| The cover plate is becoming a tripping hazard. |
| Tighten the centering screw that connects the cover plate to the centering turn-bar. |
| Can I replace the cover plate with a stainless steel plate? |
| Yes |
| What are the stainless steel grade options available? |
| Stainless Steel Grade 316 and Stainless Steel Grade 304 |
Cant find what you are looking for?
Send us your Inquiry
If you have Specifications, Drawings, or a Bill of Quantities, we will review them and get back to you with a proposal.
Schedule a Meeting
Feel free to schedule a meeting with one of our consultants to help you find the right product.
Download Our Catalogue
Download our Catalogue so that you may pass it on to your colleagues